PCP #20205 · Lanxess Corporation · Antimicrobial
Water treatment microbiocide containing 50% glutaraldehyde for control of bacteria (including slime-forming and sulfate-reducing bacteria), fungi, yeast, and algae in industrial water systems, paper mills, oil and gas operations, and water-based coatings.
Crop × pest × application rate combinations from the official label. Rates converted to per-acre. PHI is the pre-harvest interval; REI is the restricted-entry interval. Always confirm against the official label PDF before applying.
| Crop | Target | Rate | PHI | REI |
|---|---|---|---|---|
| Air Washers and Industrial Scrubbing Systems | Bacteria, fungi, yeast, and algae | 30–100 ppm | – | – |
| Air Washers and Industrial Scrubbing Systems | Bacteria, fungi, yeast, and algae | 100–400 ppm | – | – |
| Air Washers and Industrial Scrubbing Systems | Bacteria, fungi, yeast, and algae | 14–300 ppm | – | – |
| Air Washers and Industrial Scrubbing Systems | Bacteria, fungi, yeast, and algae | 100–400 ppm | – | – |
| Drilling Muds and Fluids | Bacteria (including sulfate-reducing bacteria) | 50–1000 ppm | – | – |
| Drilling Muds and Fluids | Bacteria (including sulfate-reducing bacteria) | 50–1000 ppm | – | – |
| Gas Production and Transmission Pipelines | Bacteria | 500–5000 ppm | – | – |
| Gas Storage Wells and Systems | Bacteria | 500–5000 ppm | – | – |
| Gas Storage Wells and Systems | Bacteria | 200–2000 ppm | – | – |
| Heat Transfer Systems | Bacteria, fungi, yeast, and algae | – | – | – |
| Hydrotesting | Bacteria | 100–4000 ppm | – | – |
| Offshore Drilling Muds and Fluids | Bacteria (including sulfate-reducing bacteria) | 50–1000 ppm | – |
| – |
| Offshore Drilling Muds and Fluids | Bacteria (including sulfate-reducing bacteria) | 50–1000 ppm | – | – |
| Offshore Water Floods | Bacteria (including sulfate-reducing bacteria) | 100–1000 ppm | – | – |
| Offshore Water Floods | Bacteria (including sulfate-reducing bacteria) | 20–1000 ppm | – | – |
| Packer Fluids | Bacteria (including sulfate-reducing bacteria) | 50–600 ppm | – | – |
| Paper Mills | Bacteria (including slime-forming bacteria, sulfate-reducing bacteria), fungi, yeast, and algae | – | – | – |
| Paper Mills | Bacteria (including slime-forming bacteria, sulfate-reducing bacteria), fungi, yeast, and algae | – | – | – |
| Pigments and Filler Slurries | Bacteria, fungi, yeast, and algae | 100–600 ppm | – | – |
| Pipeline Pigging and Scraping | Bacteria | 0.1–1 % | – | – |
| Water Floods | Bacteria (including sulfate-reducing bacteria) | 20–5000 ppm | – | – |
| Water Floods | Bacteria (including sulfate-reducing bacteria) | 100–5000 ppm | – | – |
| Water-Based Coatings | Bacteria, fungi, yeast, and algae | 100–600 ppm | – | – |
| Water-Based Coatings | Bacteria, fungi, yeast, and algae | 100–600 ppm | – | – |
About this content. This page presents the official PRD label as published by Health Canada's Pesticides Regulatory Directorate (formerly the Pest Management Regulatory Agency), the source of record. Always read the official label and consult your provincial pesticide- application authority before use. Report an error.
